Product Description
An odourless, fast drying, high tack and high coverage adhesive.
Product Features
◆An odourless, fast drying, high tack and high coverage adhesive, for bonding between sponge,foam, cloth, non-oil leather, wood board, paper, thermal insulation cotton and other materials. It isnot suitable for bonding oily leather, large radian and high tension modeling materials, metal
materials, etc.
◆It provides high initial "grab" with sufficient open time to allow for positioning of materials.
◆Low soak-in gives better looking and higher coverage bonds.
◆Soft, non-dimpling glue lines.
Main Ingredients
SBS thermoplastic rubber (9003-55-8), Refined Resin (64742-16-1), Refined Rosin (8050-09-7), Cyclohexane (110-82-7),Methyl Alkane (101-68-8), Dicarboxylic Acid (616-38-6), etc.
Typical Physical Properties
Property | Values | Notes |
Solids Content(%) | 34±2 | |
VOCs | 350g/L | |
Coverage | 25-90grams /m² | The specific amount of adhesive is depending on different materials and processes |
Density | 0.8-0.86 | Water=1 |
Durability class | D1 | EN204 |
Color | Light yellow | |
Viscosity | 80±15mPa.s | |
Flammable Solvent | Yes | |
Flammable Propellant | Yes | |
Base | Synthetic resin | |
Bonding Range | 25 sec - 5 min |
Package
4L. 18L, 200L
Storage and Shelf Life
Store product at 50-120°F (10-49°C) for maximum storage life. Higher temperatures reduce normal storage life. Lower temperatures may cause increased viscosity of a temporary nature. Rotate stock on a “first in-first out” basis. When stored at the recommended conditions in the original, unopened container, this product has a
shelf life of 12 months from the date of manufacture. it still can be used If the adhesive does not go bad even over its shelf life.