18L Spray Glue Light Odour Adhesive For Bonding Foam Mattress Sofa
Using Instruction
1. Remove impurities on the surface of the materials, and drain the water accumulated in the air compressor and pipes;
2. The distance of the spray gun is about 20-50 cm away from the surface of the material, and air pressure to about 6-8 kg;
3. When spraying glue, the spray gun should move as smoothly as possible, and the glue layer should not be too thick or too thin;
4. After spraying, it should be left to air for 1-5 minutes (the airing time varies reasonably according to the room temperature, humidity, and material);
5. When bonding, bond from the edges around at the beginning, and slowly press toward the middle;
6. The performance is better through proper pressurization, and the force should be applied evenly when pressurizing, and there is no special requirement for the specific pressure.
Remark:
1. Open the doors and windows to ensure that the workshop is well-ventilated;
2. Smoking is strictly prohibited, keep away from fire sources, prevent static electricity from igniting (especially in autumn and winter), and smoking is strictly prohibited in the workplace;
3. Strictly abide by the operating procedures, wear labor protection products, and handle with care when handling to prevent damage to the container;
4. For women and minors suffering from nervous system diseases, anemia, liver disease, pregnancy, and lactation, etc., it is not suitable to engage in the operation of this product;
5. Please try it out before using this product to verify whether it is suitable for the proposed material and production process. It can be used officially after meeting the requirements, and it cannot be used directly in batches without a sample. In the process of use, in case of handover of new and old employees, replacement of purchased materials, or other changes related to glue, please contact our company in time to minimize unnecessary waste and loss.
6. When the spray gun is not in use at the end of production, please clean the spray gun with thinner, gun washing water, etc. to prevent the spray gun from clogging.
Main Raw Material |
SBS Rubber |
Appearance |
Light yellow, light smell |
Shelf life |
12 Month |
Solid content |
33±2 |
Viscosity cps (25℃) |
90±10 mpa.s |
Gravity |
0.86~0.90 |
Heat resistance |
≥61℃ |
180°peel strength |
≥0.7kN/m |
Looking for a powerful and reliable adhesive that can handle all your foam bonding needs? Look no further than our Spray Glue Light Odour Adhesive! This premium adhesive is specifically designed for bonding foam materials and is perfect for a wide range of applications, including mattresses and sofas.
With its light odour and easy-to-use spray formula, our adhesive provides a hassle-free bonding experience that is both convenient and safe. Whether you're a DIY enthusiast or a professional upholsterer, our adhesive is the perfect choice for all your foam bonding needs.
Our Spray Glue Light Odour Adhesive provides a strong and reliable bond that can handle even the toughest jobs. Plus, its fast-drying formula means you can get your project done quickly and efficiently. And with its easy-to-use spray nozzle, our adhesive makes application a breeze.
So if you're looking for a reliable and efficient way to bond foam materials for your mattress or sofa, look no further than our Spray Glue Light Odour Adhesive. Try it today and experience the difference for yourself!